How To Perform Boiler Maintenance On Your Own
An inspection by a heating engineer every 6 months should keep your boiler in good condition in West London but it is strongly advised that the owner performs regular maintenance of boiler frequently. If you’re running an old and outdated boiler, you probably spend a lot of time and money on maintenance. In the long run, the boiler replacement cost will be much cheaper than running an inefficient boiler and spending on repairs, which is why it’s viable to just get a new one if you’re experiencing this. Here’s how you can perform boiler maintenance on your own. Check out magnaclean.
Check The Pilot Light
Start off by checking the boiler’s pilot light – if possible, that is. If the flame is blue and strong then the boiler is in good shape. On the other hand, if the flame is yellow or orange then that implies that the boiler’s not burning the fuel efficiently.
Incomplete combustion is a hazard and poses a threat to you and your family in the form of carbon monoxide. According to West London plumbing services, you should contact a certified heating engineer without any delay when you observe that the boiler’s flame is yellow or orange.
Keep Up The Pressure
According to emergency plumbers West London, mostly the boiler systems break down or malfunction because of a pressure that’s either too high or too low. It is a known fact that the boiler system will lose pressure over time. You need to ensure that the pressure remains between 1 and 1.5 bar for optimal efficiency.
A low pressure means the boiler won’t be firing up and a high pressure means that the pipes and equipment will be experiencing severe strain. Each boiler’s pressure is varied via different mechanisms. Check your boiler’s instruction manual to learn more or check with your plumber for adjusting the pressure of your boiler.
Clear The Area
In order to retain the optimal efficiently, a boiler requires sufficient ventilation. If the area around your boiler is restricted or full of clutter, the efficiency of your boiler will drop. Also, make sure that you regularly inspect the flue pipe for any blockages and clear them out if there are any.
Let’s say your boiler has malfunctioned and you’re calling in a professional, it is advisable that you move the boiler to a clutter-free space for accessibility purposes.
Lag Your Pipes
To prevent your pipes from freezing, purchase and install lagging for your pipes. It is a kind of insulation for pipes that is crafted from glass wool or mineral, foam or polyethylene. The installation process is quite easy; simply wrap the pipe with the lagging.
Frozen pipes imply that the pressure rises in the system and can cause a leak or worse; complete breakdown.
Seal Your Home
In order to make sure that your boiler is provided with the required help while it works, make sure that your home is properly insulated. Plug any gaps and holes that open up to the outside.
Your boiler system might be running at its full capacity and yet not be delivering the results that it should be because of the warm air leaking out. Repair or replace any windows that are in poor condition and have extra insulation installed for ensuring that no heat escapes the building.
Arrange For An Annual Service
As for the final tip; make sure you get your boiler and heating system checked once a year at the very least. DIY boiler maintenance can only go so far. For a detailed and professional inspection and maintenance of your boiler system, rely on professional West London plumbers only.
A certified plumber will be able to carry out all the mandatory boiler maintenance checks without compromising the integrity of the boiler. Having a licensed plumber check your boiler and plumbing system also ensures that warranties don’t get void!
Good luck with your boiler maintenance and remember; better safe than sorry!