Home Refrigerator Repairing Checklist
No matter the quality of your appliance, time take toll on all things. It must face wear and tear and need maintenance from time to time, so it can work on its optimum capacity. This is true for temperature sensitive appliances like refrigerator and freezer.
Long spell of summer put extra burden on a refrigerator and it becomes prone to breakage. An average refrigerator has a life span of about 14 to 17 years. But how well-maintained you keep it determines its ultimate age. If you can manage to keep it in the best possible condition, it can keep on working for much longer. To keep your refrigerator working, here is a checklist from refrigerator repair companies in Upper Marlboro, to ensure its good health:
1. Inspect the door seals
Every 2-3 months, inspect the door seals on your refrigerator. Before inspecting, make sure to clean the seals, so you can have a better look to check if there is any damage. One simple trick to check the grip of door seals in to shut the door on a banknote. Try to remove the banknote while keeping the door closed. If it takes some force to come out, the seals are intact. If it comes out easily, you need to replace the seals to ensure no cool air escapes from the inside of your refrigerator. Otherwise, the motor has to work hard to compensate for the loss.
2. Keep the coils clean
A mesh of coils at the back of a refrigerator is responsible to remove heat from the system. Mostly, you have to move your fridge to reach the coils. Make sure the refrigerator is unplugged before you get to clean the coils. Use vacuum cleaner to clean the surface. Small brushes can also help in removing dust. This enhances the capacity if coils to eliminate heat, which results in better refrigerator health.
3. Check the level of the refrigerator
To maintain the health of a refrigerator, it is important to make sure the surface under it is level. If the surface is not level, it can be a hurdle to close the door properly. Many people like to tilt it back a little to make sure door closes perfectly without pushing to close it.
The important thing is the surface underneath your refrigerator. Maintain the optimum level to ensure the proper working of your fridge.
4. Empty the drip pan properly
Drip pan collects excessive water from drainage hole. If you experience condensation in your refrigerator, this is essential to empty. Before tinkering with the drip pan, make sure to go through user manual first to observe safety precautions. It should be emptied and cleaned to remove the mineral deposition from its base.
5. Maintain optimum temperature
There is no need to make the refrigerator ice cold. Freezer is there to make and keep the ice. It is because it puts extra pressure on the motor which is prone to breakage and unnecessary freezer repairs. Experts recommend that you keep the refrigerator temperature around 37 to 40-degree Fahrenheits.
6. Load your refrigerator
Refrigerator needs thermal mass. In clear words, it needs something to keep working and cannot run idly. You need to keep things in your refrigerator to allow it to work up its potential. Keep in mind that loading is not over-loading, but it shouldn’t e empty either. The target is to strike the perfect balance so that there is a room between items for cool air to flow. It is required to keep the things cool and your refrigerator working properly.
This is the checklist to maintain your refrigerator on your own without seeking the help of a professional. These precautions and small tasks can keep your fridge and freezer from breaking down, which can cost you a lot of money and trouble.
Bio:
Has your favorite home improvement and appliance turned off all of a sudden? There is no need to panic a lot as long as you have my expert opinions by your side. With over 10 years in the home appliance refrigerator repair upper Marlboro md industry.